Examples
The following example shows how to retrieve the MAC address table from the network processors:
RP/0/RSP0/CPU0:router# l2vpn resynchronize forwarding mac-address-table location 0/4/CPU0
Related Commands
DescriptionCommand
Displays forwarding information from the layer2_fib manager
on the line card.
show l2vpn forwarding, on page 170
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
270
Multipoint Layer 2 Services Commands
l2vpn resynchronize forwarding mac-address-table location
To Next Page
Loading...
Need help?
General
