PBB Core, state is up
Vlan-id: 1; XC ID 0x2000001
MAC learning: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 600, Action: none, Notification: syslog
MAC limit reached: no
Security: disabled
Split Horizon Group: none
DHCPv4 snooping: profile foo
IGMP Snooping profile:
Storm Control: disabled
List of ACs:
AC: GigabitEthernet0/1/0/0, state is up
Type Ethernet
MTU 1500; XC ID 0x2000001; interworking none; MSTi 0
MAC learning: enabled
Flooding:
Broadcast & Multicast: enabled
Unknown unicast: enabled
MAC aging time: 300 s, Type: inactivity
MAC limit: 4000, Action: none, Notification: syslog
MAC limit reached: yes
Security: disabled
DHCPv4 snooping: disabled
Static MAC addresses:
0000.0000.0000
0001.0002.0003
This table describes the significant fields shown in the display.
Table 9: show l2vpn bridge-domain detail Command Field Descriptions
DescriptionField
Name of bridge domain group is displayed.Bridge group
Name of bridge domain is displayed.bridge-domain
ID assigned to this bridge domain is displayed.ID
Current state of the bridge domain is displayed.state
Split horizon group ID. This field is not used.ShgId
ID for the Multiple Spanning Tree.MSTi
Shows whether the AC is a member of the split
horizon group for ACs. There is only one split horizon
group for ACs per bridge domain.
• Enabled—The port belongs to the split horizon
group for ACs.
• None—The port does not belong to the split
horizon group for ACs.
Split Horizon Group
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
330
Multipoint Layer 2 Services Commands
show l2vpn bridge-domain (VPLS)
To Next Page
Loading...
Need help?
General
