RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-mac)# aging
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-mac-aging)# time 600
Related Commands
DescriptionCommand
Enters the MAC aging configuration submode to set the aging
parameters such as time and type.
aging (VPLS), on page 234
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
bridge-domain (VPLS), on page 240
Creates a bridge group so that it can contain bridge domains and
then to assign network interfaces to the bridge domain.
bridge group (VPLS), on page 242
Enters L2VPN configuration mode.l2vpn, on page 100
Enters L2VPN bridge group bridge domain MAC configuration
mode.
mac (VPLS), on page 277
Configures the type for MAC address aging.type (VPLS), on page 378
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
375
Multipoint Layer 2 Services Commands
time (VPLS)
To Next Page
Loading...
Need help?
General
