Related Commands
DescriptionCommand
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
bridge-domain (VPLS), on page 240
Creates a bridge group so that it can contain bridge domains and
then to assign network interfaces to the bridge domain.
bridge group (VPLS), on page 242
Enters L2VPN configuration mode.l2vpn, on page 100
Configures the MPLS static labels and the static labels for the access
pseudowire configuration.
mpls static label (VPLS), on page 287
Adds an access pseudowire port to a bridge domain or a pseudowire
to a bridge virtual forwarding interface (VFI).
neighbor (VPLS), on page 293
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
381
Multipoint Layer 2 Services Commands
vfi (VPLS)
To Next Page
Loading...
Need help?
General
