Cisco A9K-SIP-700 Reference Guide

Examples
In the following example, the backbone source MAC address is set to 0045.1200.04:
config
l2vpn
pbb
backbone-source-mac 0045.1200.0400
!
!
This example shows how to set the backbone source MAC address in the EVPN Interface Ethernet segment
configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# evpn
RP/0/RSP0/CPU0:router(config-evpn)# interface bundle-ether 1
RP/0/RSP0/CPU0:router(config-evpn-ac)# ethernet segment
RP/0/RSP0/CPU0:router(config-evpn-ac-es)# backbone-source-mac 0045.1200.0400
RP/0/RSP0/CPU0:router(config-evpn-ac-es)#
Related Commands
DescriptionCommand
Configures the provider backbone bridge core or edge.pbb, on page 420
Enters EVPN configuration mode.evpn, on page 400
Enters the EVPN Interface configuration mode.interface (EVPN), on page 410
Enters EVPN interface ethernet segment configuration mode.ethernet-segment, on page 396
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
388
Provider Backbone Bridge Commands
backbone-source-mac

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English