Examples
The following example shows how to enable packet debugging for PVRSTAG packets received at a specific
interface:
RP/0/RSP0/CPU0:router#debug spanning-tree pvrstag packet brief received interface
gigabitEthernet 0/0/0/1
Wed Nov 24 22:12:33.861 PST
The following example shows how to enable packet debugging for PVRSTAG packets sent from a specific
interface:
RP/0/RSP0/CPU0:router#debug spanning-tree pvrstag packet brief sent interface gigabitEthernet
0/0/0/1
Wed Nov 24 22:15:12.893 PST
Related Commands
DescriptionCommand
Displays the values currently used for populating the BPDUs sent
by all ports.
show spanning-tree pvrstag, on page 613
Enters the Per VLAN Rapid Spanning Tree Access Gateway
(PVRSTAG) configuration submode.
spanning-tree pvrstag, on page 629
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
490
Multiple Spanning Tree Protocol Commands
debug spanning-tree pvrstag packet
To Next Page
Loading...
Need help?
General
