Examples
The following example shows how to enable packet debugging for PVSTAG packets received at a specific
interface:
RP/0/RSP0/CPU0:router#debug spanning-tree pvstag packet brief received interface
gigabitEthernet 0/0/0/1
Wed Nov 24 22:12:33.861 PST
The following example shows how to enable packet debugging for PVSTAG packets sent from a specific
interface:
RP/0/RSP0/CPU0:router#debug spanning-tree pvstag packet brief sent interface gigabitEthernet
0/0/0/1
Wed Nov 24 22:15:12.893 PST
Related Commands
DescriptionCommand
Displays the values currently used for populating the BPDUs sent
by all ports.
show spanning-tree pvstag, on page 615
Enters the Per VLAN Spanning Tree Access Gateway (PVSTAG)
configuration submode.
spanning-tree pvstag, on page 631
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
492
Multiple Spanning Tree Protocol Commands
debug spanning-tree pvstag packet
To Next Page
Loading...
Need help?
General
