Examples
The following example shows how to enable brief debug for REP Access Gateway packets received at a
specified interface.
RP/0/RSP0/CPU0:router#debug spanning-tree repag packet brief received interface
gigabitEthernet 0/0/0/1
Mon Nov 15 21:26:08.155 PST
The following example shows how to enable full debug for REP Access Gateway packets sent from a specific
location:
RP/0/RSP0/CPU0:router#debug spanning-tree repag packet full sent location 0/0/CPU0
Mon Nov 15 21:27:10.674 PST
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
494
Multiple Spanning Tree Protocol Commands
debug spanning-tree repag packet
To Next Page
Loading...
Need help?
General
