Examples
The following example shows how to set the port ID:
RP/0/RSP0/CPU0:router(config-mstag-if)# port-id 111
Related Commands
DescriptionCommand
Enables MSTAG packet debugging.debug spanning-tree mstag packet, on page
483
Enables packet debugging for sent and received PVRSTAG
packets.
debug spanning-tree pvrstag packet, on
page 489
Enables packet debugging for sent and received PVSTAG packets.debug spanning-tree pvstag packet, on page
491
Enables Resilient Ethernet Protocol (REP) Access Gateway
debugging commands.
debug spanning-tree repag packet, on page
493
Enter the MSTAG interface configuration submode, and enables
MSTAG for the specified port.
interface (MSTAG/REPAG), on page 523
Enters PVST or PVRST Access Gateway Interface configuration
submode and enables either PVSTAG or PVRSTAG for the
specified port.
interface (PVSTAG/PVRSTAG), on page
529
Enters MSTAG Instance configuration mode or REPAG Instance
configuration mode.
instance (MSTAG/REPAG), on page 515
Enters the MST Access Gateway configuration submode.spanning-tree mstag, on page 625
Enters the Per VLAN Rapid Spanning Tree Access Gateway
(PVRSTAG) configuration submode.
spanning-tree pvrstag, on page 629
Enters the Per VLAN Spanning Tree Access Gateway (PVSTAG)
configuration submode.
spanning-tree pvstag, on page 631
Enters the Resilient Ethernet Protocol Access Gateway (REPAG)
configuration submode.
spanning-tree repag, on page 633
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree mstag, on page 604
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree pvrstag, on page 613
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree pvstag, on page 615
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree repag, on page 617
Enables a PVST or PVRST VLAN instance on the interface and
enters PVSTAG or PVRSTAG VLAN configuration mode.
vlan, on page 639
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
555
Multiple Spanning Tree Protocol Commands
port-id
To Next Page
Loading...
Need help?
General
