Related Commands
DescriptionCommand
Configures the encapsulation mode of the tunnel interface.tunnel mode, on page 51
Sets a tunnel interface's source address.tunnel source, on page 53
Specifies the value of the TOS field in the tunnel encapsulating
packets.
tunnel tos, on page 55
Configures the Time-To-Live (TTL) for packets entering the
tunnel.
tunnel ttl, on page 57
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
44
Generic Routing Encapsulation Commands
tunnel destination
To Next Page
Loading...
Need help?
General
