DescriptionCommand
Enters the MST Access Gateway configuration submode.spanning-tree mstag, on page 625
Enters the Resilient Ethernet Protocol Access Gateway
(REPAG) configuration submode.
spanning-tree repag, on page 633
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree mstag, on page 604
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree repag, on page 617
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
567
Multiple Spanning Tree Protocol Commands
provider-bridge (MSTAG/REPAG)