VLAN 10
Preempt delay is disabled.
Sub-interface: GigabitEthernet0/0/0/1.20 (Up)
Max Age: 20
Root Priority: 0
Root Bridge: 0000.0000.0000
Cost: 0
Bridge Priority: 32768
Bridge ID: 6161.6161.6161
Port Priority: 128
Port ID: 1
Hello Time: 2
Active: no
BPDUs sent: 0
Topology Changes: 123
VLAN 20
Related Commands
DescriptionCommand
Enables Resilient Ethernet Protocol (REP) Access Gateway
debugging commands.
debug spanning-tree repag packet, on page
493
Displays BPDU information from root (bridge ID, cost, and
priority) and the BPDU information being sent on the port.
show spanning-tree repag bpdu interface, on
page 619
Displays details of the last topology change that occurred for
each pair of port and instance.
show spanning-tree repag topology-change
flushes, on page 621
Enters the Resilient Ethernet Protocol Access Gateway
(REPAG) configuration submode.
spanning-tree repag, on page 633
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
618
Multiple Spanning Tree Protocol Commands
show spanning-tree repag
To Next Page
Loading...
Need help?
General
