Related Commands
DescriptionCommand
Enables debugging for sent and received MSTP packets.debug spanning-tree mst packet, on page
479
Enables debugging protocol-state changes such as port role or
state changes, topology change notification.
debug spanning-tree mst protocol-state, on
page 481
Enters the multiple spanning tree instance (MSTI) configuration
submode.
instance (MSTP), on page 517
Enters the MSTP interface configuration submode, and enables
STP for the specified port.
interface (MSTP), on page 525
Enables Multiple VLAN Registration Protocol (MVRP) in static
mode.
mvrp static, on page 546
Displays the multiple spanning tree protocol status information.show spanning-tree mst, on page 589
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
624
Multiple Spanning Tree Protocol Commands
spanning-tree mst
To Next Page
Loading...
Need help?
General
