Related Commands
DescriptionCommand
Enables MSTAG packet debugging.debug spanning-tree mstag packet, on page
483
Enter the MSTAG interface configuration submode, and
enables MSTAG for the specified port.
interface (MSTAG/REPAG), on page 523
Enters MSTAG Instance configuration mode or REPAG
Instance configuration mode.
instance (MSTAG/REPAG), on page 515
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree mstag, on page 604
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
626
Multiple Spanning Tree Protocol Commands
spanning-tree mstag
To Next Page
Loading...
Need help?
General
