DescriptionCommand
Enables packet debugging for sent and received PVSTAG
packets.
debug spanning-tree pvstag packet, on page
491
Enters PVST or PVRST Access Gateway Interface configuration
submode and enables either PVSTAG or PVRSTAG for the
specified port.
interface (PVSTAG/PVRSTAG), on page
529
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree pvrstag, on page 613
Displays the values currently used for populating the BPDUs
sent by all ports.
show spanning-tree pvstag, on page 615
Enters the Per VLAN Rapid Spanning Tree Access Gateway
(PVRSTAG) configuration submode.
spanning-tree pvrstag, on page 629
Enters the Per VLAN Spanning Tree Access Gateway (PVSTAG)
configuration submode.
spanning-tree pvstag, on page 631
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
640
Multiple Spanning Tree Protocol Commands
vlan