Related Commands
DescriptionCommand
Specifies a tunnel interface's destination address.tunnel destination, on page 43
Configures the encapsulation mode of the tunnel interface.tunnel mode, on page 51
Specifies the value of the TOS field in the tunnel encapsulating
packets.
tunnel tos, on page 55
Sets a tunnel interface's source address.tunnel source, on page 53
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
58
Generic Routing Encapsulation Commands
tunnel ttl
To Next Page
Loading...
Need help?
General
