Related Commands
DescriptionCommand
Specifies how long a backup pseudowire should wait before
resuming operation after the primary pseudowire goes down.
backup disable (L2VPN), on page 68
Enters L2VPN configuration mode.l2vpn, on page 100
Configures a pseudowire for a cross-connect.neighbor (L2VPN), on page 114
Enters p2p configuration submode to configure point-to-point
cross-connects.
p2p, on page 134
Configures cross-connect groups.xconnect group, on page 227
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
67
Point to Point Layer 2 Services Commands
backup (L2VPN)
To Next Page
Loading...
Need help?
General
