NIBP Monitoring
12-9
12.9 NIBP Analysis
At the NIBP analysis interface you can review the patient's systolic pressure and diastolic pressure, the percentage
of higher/lower values and the average, maximum and minimum systolic pressure and diastolic pressure within the
measurement time.
1) Select the NIBP parameter area to enter [NIBP] menu.
2) Select [NIBP Dynamic Analysis] button → [NIBP Dynamic Analysis] page.
You can also set the following parameters in NIBP Analysis:
[Daily Start Time]: set the NIBP data statistics starting time (hour or minute).
[Daily End Time]: set the NIBP data statistics ending time (hour or minute).
[SYS Normal High] and [SYS Normal Low]: set the high and low limits of systolic pressure.
[DIA Normal High] and [DIA Normal Low]: set the high and low limits of diastolic pressure.
To Next Page
