Use only secure Local Area Network connection. Make sure your hospital’s firewall software is
configured correctly, thus blocking incoming connection requests from the Internet. Improper use of
network connection may cause virus infections of the Windows system and eventually malfunctions may
occur.
The following changes to the IT network require additional analysis:
Changes in network configuration
Connection and disconnection with other devices
Device updates and upgrades
Additional network security features may be established by the local security policy.
Connection of the monitor to an IT NETWORK that includes other medical equipment could result in
previously unidentified risks to the patient, operators or other function units.
Personnel responsible for connecting this system should identify, analyze, evaluate and control these
risks and be liable to verify if the system complies with IEC 60601-1. If you have any questions, please
contact us.
When you change the IT network configuration; like adding connection of other items to the IT
NETWORK; or disconnecting items from the IT NETWORK; you shall follow the regulation of Local Area
Network connection, and the user manual of CMS.
If the following changes occur on the IT NETWORK, please communicate with our professional service
personnel:
• update of equipment connected to the IT NETWORK; and
• upgrade of equipment connected to the IT NETWORK.
The system has been verified for compatibility, and compliance for connection to a local area network
(LAN) which complies with IT safety standard of IEC 60950-1/IEC 62368-1.
The hospital LAN must be equipped with antivirus software and a firewall to supervise, defend and clean
up viruses and malware.
To Next Page
