Alarms
7-6
7.8.3 Set Alarm Reminder
When the alarm volume is set to 0, or the alarm is reset, or the alarm function is turned OFF, the monitor will
provide a periodic alarm mute reminder to remind the user of the situation that there is still activated alarm in the
current system. That is, when alarm condition is inactivated, a reminder signal characteristic “Di---" provided.
To set Alarm Reminder::
1) Click [Main Menu] hot key → [System] → [Maintenance], enter the maintenance password and click the Enter
key.
2) Click [Alarm] button → [Pause/Reset] tab.
3) Set [Alarm Reset Reminder] and [Alarm Off Reminder].
When [On] is selected, the monitor will generate an alarm reminder at set intervals.
When [Off] is selected, the monitor will not generate the alarm reminder, and the confirmed physiological
alarm and the non-clearable technical alarm will be muted permanently.
4) Select [Reminder Interval].
7.8.4 Set the Function of Alarm Volume Enhancing
The monitor has the function of automatically escalating the alarm volume. If the alarm is not confirmed after the
specified time, its volume will be increased automatically. Set the function as follows:
1) Click [Main Menu] hot key → [System] → [Maintenance], enter the maintenance password and click the Enter
key.
2) Select [Alarm] → [Audio].
3) Set [Auto Increase Volume] as [Level 2], [Level 1] or [Off].
[Level 2]: If the alarm is not confirmed after the specified time, its volume will be increased by Level 2
automatically.
[Level 1]: If the alarm is not confirmed after the specified time, its volume will be increased by Level 1
automatically.
[Off]: If the alarm is not confirmed after the specified time, its volume will not change.
Select [Increase Volume Delay] to set the specified delay time of alarm volume escalation.
7.9 Alarm Paused/Alarm Audio Pause
7.9.1 Alarm Paused Categories
You can enable the function of alarm paused or alarm audio pause, which depends on the paused setting. Set it as
follows:
1) Click [Main Menu] hot key → [System] → [Maintenance], enter the maintenance password and click the Enter
To Next Page
