Print
21-4
2) Click [Tabular Trends Report].
3) Set the desired menu items. Part of menu items are described in the table below.
Print the tabular trends report
of a specific time period.
The print time period can be set as: [30min], [1h], [2h] and
[4].
Choose a time step for tabular
trends.
[NIBP] or [C.O.]: display the values of these parameters at
the time of measurement.
[Auto]: call the set value of [Time Step] in the Tabular
Trends window at the time of printing.
Choose a printing principle
[Time Preferred]: print one page of tabular trends in a
tabular format when [Time Step] is set to [Auto].
[Parameter Preferred]: print one page of tabular trends in
a tabular format when [Time Step] is set to [Auto].
21.6.4 Set the Graphic Trends Report
1) Click [Main Menu] → [Report] → [Normal Report].
2) Click [Graphic Trends Report].
3) Set the desired menu items.
21.6.5 Printer Out of Paper
When the printer is out of paper no response will be given to the print request sent; when there are too many tasks
without a response there may be a problem with the printer. At this moment, please properly load the paper into
the printer and resend the print request; when necessary, restart the printer.
Therefore, please make sure there is enough paper in the printer before sending a print request.
To Next Page
