4-1
Chapter 4 Basic Operations
4.1 Operation and Browsing
4.1.1 Use of theTouch Screen
The monitor is equipped with a touch screen allowing touch operations. If you don't want to use the touch function,
or to prevent misoperation, you can lock the screen. Long press the hot key [Main Menu] and slide it in the direction
of the arrow to temporarily lock the screen, and then the symbol “ ” will be displayed above [Main Menu],
indicating that the screen has been locked.
The screen lock time can be defined as follows:
1) Enter the [Display] page:
Select the [Screen Setup] hot key → select [Display].
Select the [Main Menu] hot key → select [Display] from the [Display] column.
2) Set [Screen Lock Duration].
Unlocking Operation:
After reaching the set screen lock duration, the touch screen will be unlocked automatically.
Long press the [Main Menu] hot key and swipe in the arrow direction to unlock the touch screen.
4.1.2 Use of a Mouse
This monitor supports a “plug and play” USB mouse. You can use the mouse for interface operations.
4.1.3 Use of a Soft Keyboard
This monitor provides a soft keyboard for information input. The soft keyboard has the following functions:
Select characters on the keyboard to input information.
Use the Delete key to delete the previous character.
Use the shift key to switch between upper and lower case letters.
Use the Enter key to confirm the input and close the soft keyboard.
If the monitor is connected with an external keyboard, it can be used in conjunction with the soft keyboard..
To Next Page
