Comen N10 - Edit Events; View Details of Events; Print Events; Full-Disclosure Waveforms

Clinical Assistant Assessment (CAA)
17-6
17.6.3 Edit Events
1) On the Events page, check the events to be edited;
2) Click [...] to edit the checked events:
 [Select All]: check the whole event list.
 [Note]: enter a note to the event.
 [Unselect All]: uncheck all events.
17.6.4 View Details of Events
1) Go to the Events page;
2) Click [Details].
In the Details window, you can perform the following operations:
 Set the [ECG Gain].
 Set the [Waveform Speed].
 Click […] to select [Note] or [Rename].
You can click [Event List] to return to the event list.
17.6.5 Print Events
1) Go to the Events page;
2) Click " " or " " to go to the [Print Setup] menu;
3) Select an option as needed and then click [Print]:
 [Print All Event List]: print the whole event list.
 [Print Displayed Event Detail]: print the currently displayed waveform and parameter details.
17.7 Full-Disclosure waveforms
On the Full Disclosure page, you can review up to 48-hours waveform data. You can view compressed waveforms,
full waveforms and parameter values.
17.7.1 Go to the Full-Disclosure Waveforms Page
Follow either path described below to go to the Full-Disclosure Waveforms page:
 Click [Review] hot key → [Full Disclosure] tab; or
 Click [Main Menu] hot key → [Review] → [Full Disclosure].