2-1
Chapter 2 Overview
This monitor is equipped with a touch screen allowing direct touch operations. The device is designed in accordance
with domestic and international safety standards in relation to medical electrical equipment.
2.1 Product Introduction
2.1.1 Product Composition
This monitor is mainly composed of power supply module, main control unit, ON/OFF key board, infrared
transponder, main board of autonomous system, recorder, display screen and battery supply module.
2.1.2 Intended Use of Product
N10/N10A/N10C/N12/N12A/N12C/N15/N15A/N15C (hereafter N series) patient monitor is a multi-parameter
physiological patient monitor intended for use within a professional healthcare facility. The monitors support
multiple non-invasive and invasive measurements, including ECG (3-lead, 5-lead, 6-lead or 12-lead selectable),
Arrhythmia Analysis, ST Segment Analysis, QT Analysis, interpretation of resting 12-lead ECG, Heart Rate (HR),
Respiration rate (Resp, impedance respiration and CO
2
airway gas), Temperature (Temp), Pulse Rate (PR), Pulse
Oxygen Saturation (SpO
2
), Non-invasive Blood Pressure (NIBP), Invasive Blood Pressure (IBP) , Pulmonary Artery
Wedge Pressure (PAWP), Cardiac Output (C.O.), and EtCO2 monitoring, supporting the function of OxyCRG display,
renal calculation, Hemo (Hemodynamics) calculation, oxygenation calculation, ventilation calculation and
medication calculation.
2.1.3 Product Differentiations
To Next Page
