Print
21-2
4) Set the [Paper Size].
Then you can click [Print Test Page] to start printing in order to verify whether the printer works properly.
21.4 Manual Printing
21.4.1 Start Printing on the Current Page
To print the real-time report, click [Realtime Print] hot key or go to the [Normal Report] page to click [Realtime
Report] (refer to“
Section 21.4.2 Print Normal Reports”
).
21.4.2 Print Normal Reports
Normal reports include:
ECG Report;
Realtime Report;
Tabular Trends Report;
Graphic Trends Report.
NIBP List Report
Follow the steps below to print normal reports:
1) Click [Main Menu] hot key → [Report] → [Normal Report].
2) Select the report tab to be printed.
3) Check the print settings.
4) Click [Print].
21.5 Automatic Printing
1) Follow any path described below to select a parameter alarm tab, such as [Alarm] tab:
Click [Alarm Setup] hot key;
Click the corresponding parameter area or waveform area and then select an alarm tab; or
Click [Main Menu] hot key → [Parameters] → [Setup], select the desired parameter and then select an alarm
tab.
2) Enable the desired parameter and the [Alarm Output] option.
When any alarm occurs to such a parameter, the printer will be started automatically to print the waveform data
of the parameter.
To Next Page
