Comen N10 - Chapter 6 Manage Configurations

6-15
Chapter 6 Manage Configurations
6.1 Summary
For continuous monitoring of a patient, the user/operator may be required to adjust some settings according to the
actual patient conditions. The collection of pre-set items used to operate the monitor is called a configuration. In
order to configure the monitor more effectively and rapidly, this monitor provides a variety of configurations to
meet the requirements of different patient types and different hospital departments. You can also customize a
configuration according to actual conditions and save it as a user-defined configuration.
Configuration info of the monitor mainly includes:
Parameter Configuration
Setting items related to parameter measurements, such as Wave Gain, Speed, Unit, Alarm ON/OFF, and Alarm Limit
Setup.
General Configuration
The monitor’s general setting items, such as Alarm Setup, Screen Layout, and Record.
Maintenance Configuration
Settings related to user maintenance.
Department options: General (General Monitoring)
OR (Operation Room/Anesthesia Monitoring)
ICU (Intensive Care Unit)
Neo (Neonatal Intensive Care Unit)
CCU (Coronary Care Unit)
WARNING
 The configuration management function is protected by password and must be operated and confirmed
by professional clinical medical staff.
CAUTION
 Use of different configurations, alarm settings on the same or similar monitors in one area (e.g.,
ICU or Cardiac OR) may result in danger.
 When selecting a configuration please ensure that it is appropriate for the patient being monitored.