Select an ECG waveform to display in PAWP
waveform area as the first reference waveform.
Select a respiration waveform or CO
2
waveform t displayin PAWP waveform area as the
second reference waveform
Set the sweep speed of IBP waveform. The
higher the value, the faster the sweep speed, and
the wider the waveform. This seeting is only
applicable for waveforms in the PAWP interface.
Select how to set the size of the PA waveform on the
PAWP screen.
[Auto]: the system automatically selects the
appropriste scales according to current wave
amplitude. The waveform is displayed as large as
possible within the range of upper scale and lower
scale.
[Manual]: the upper and lower scales can be
manually set according to actual situation.
14.6.6 Hemodynamic Calculation
Click [Calculations] on PAWP screen to enter the [Hemodynamic] window. Please refer to "
Section19.4
Hemodynamic Calculation
" for more information.
14.6.7 Record
After saving the current measurements on the PAWP screen, click [Record] to record the current frozen waveforms
and measurements.
To Next Page
