Information that alerts you to situations that may result in serious consequences or endangers personal
safety. Failure to observe the warning information may cause severe injury or even death of the user or
patient.
Alerts you to potential dangers or unsafe operations, which, if not avoided, may result in minor injury,
product failure or damage, or property damage, or cause more serious injury in the future.
The monitor is intended for monitoring of clinical patients, and shall be used only by trained,
professional operator (physicians, nurses and technicians).
Before using, you must check the monitor and its accessories to ensure that they can work normally and
safely.
Do not place the power plug/appliance coupler used to disconnect the device from supply mains in a
position not easily accessible by the operator.
Alarm volume and high/low alarm limits should be set depending on the patient. When a patient is
monitored do not exclusively rely on the audible alarm system. If the alarm volume is set too low or is
completely turned off the alarm will not be heard and the patient may be put into danger. Pay close
attention to the patient’s actual clinical conditions continuously is the most reliable way.
To avoid the risk of electric shock, this equipment must only be connected to a supply mains with
protective earth. If the power socket is not connected to a ground conductor use the rechargeable
battery to supply power to the monitor instead of using the supply mains.
Do not modify this equipment without authorization of the manufacturer.
To Next Page
