Comen N10 - Sterilization

Cleaning and Disinfection
23-9
Parts for Disinfection
Disinfectant
ECG cable, Temperature probe, IBP cable,
CO
2
extended cable, C.O. cable, and O
2
cable
OPA (5.5g/L), 70% isopropanol, 70% n-propanol, 2%
glutaraldehyde, 3% hydrogen peroxide, 0.5% sodium
hypochlorite solution.
Comen SpO
2
, Masimo SpO
2
and Nellcor SpO
2
sensor and cable extender
OPA (5.5g/L), 70% isopropanol, 70% n-propanol, 2%
glutaraldehyde, 3% hydrogen peroxide, 0.5% sodium
hypochlorite solution
NIBP pneumatic tubing
OPA (5.5g/L), 70% isopropanol, 70% n-propanol, 3%
hydrogen peroxide, 0.5% sodium hypochlorite solution
Masimo SpO
2
sensor and cable extender: if low-disinfection is required, wipe the surface with a cloth saturated with
a 1:10 bleach/water solution. Saturate another cloth with distilled water and wipe the surface. Then air-dry it.
23.5 Sterilization
DO NOT sterilize the monitor, detachable parts and specified accessories. NO sterilization procedure is required
before use.