Comen N10 - Load Configurations; Manage Configuration Password

Manage Configuration
6-18
Enter key.
3) Click [Import Configuration] button.
4) Select the settings to be imported.
5) Click [Import]
6.9 Load Configurations
1) Click [Main Menu] hot key → [Configuration] → [Load].
2) Load the settings.
 The current settings on the monitor are displayed on the [Local] screen.
 The saved settings on the USB drive are displayed on the [U disk]( USB drive) screen.
3) Click [Load].
NOTE
 Please ensure to use ONLY the dedicated USB drive to save or back up data.
6.10 Manage Configuration Password
1) Click [Main Menu] hot key → [Configuration] → [Manage], enter the configuration password and click the
Enter key
2) Click [Modify Password] button.
3) Input the old password and the new password respectively.
4) Click [OK].