Danfoss VLT series Programming Guide

Attribute Value
Sub-index 0x03
Description Trace sample count
Access Read/write
Data type UNSIGNED16
PDO mapping No
Value range UNSIGNED16
Default value –
Sub-index 0x04
Description Trace subsampling
Access Read/write
Data type UNSIGNED16
PDO mapping No
Value range UNSIGNED16
Default value –
Sub-index 0x05
Description Trace pre-trigger count
Access Read/write
Data type UNSIGNED16
PDO mapping No
Value range UNSIGNED16
Default value –
Sub-index 0x06
Description Trace trigger variable ID
Access Read/write
Data type UNSIGNED32
PDO mapping No
Value range See Table 7.204.
Default value –
Sub-index 0x07
Description Trigger level
Access Read/write
Data type FLOAT
PDO mapping No
Value range FLOAT
Default value –
Sub-index 0x08
Description Trace buer size
Access Read only
Data type UNSIGNED16
PDO mapping No
Value range UNSIGNED16
Default value –
Sub-index 0x09
Description Trace info ags
Access Read only
Data type UNSIGNED32
PDO mapping No
Value range UNSIGNED32
Servo Drive Parameter Descr...
VLT
®
Integrated Servo Drive ISD
®
510 System
328 Danfoss A/S © 01/2017 All rights reserved. MG36D102
77

Danfoss VLT series Specifications

General

Series	VLT
Category	DC Drives
Output Voltage	0-100% of input voltage
Protection Features	Overvoltage, Undervoltage, Overcurrent, Overtemperature, Short Circuit, Ground Fault
Communication Interfaces	Profibus, CANopen
Enclosure Rating	IP20, IP21, IP55, IP66
Cooling Method	Forced Air Cooling, Convection Cooling
Control Mode	Sensorless Vector, Closed Loop Vector
Ambient Temperature	-10°C to +50°C (14°F to 122°F)