128
AUX mode
General operation
Selecting a signal source
You can only select a signal source if both
signal sources, USB memory stick and AUX
signal source, are connected at the same
time. If an iPod
®
mobile digital device is
connected you cannot connect an other
signal source. In this case, selecting a
signal source is not possible.
Open the AUX main menu, see section
“Opening the AUX main menu” on
page 127.
This sample illustration shows the AUX main
menu during USB playback
AUX main menu with the available
signal sources
Select the desired signal source in the
AUX main menu.
The system will switch to the selected
signal source.
To Next Page
Loading...