Equus VI DIS - Changing the Passkey

171
PHONE
Settings
 Call up the Initialization menu, see the
section "Calling up the Initialization
menu" on page 168.
 Reset Phone Settings menu item
 Initialization menu
 In the Initialization menu, select the
menu item
Reset Phone Settings.
You will be prompted to confirm that
you really want to reset the Bluetooth
®
settings to factory default.
 Select
Yes or No.
The Bluetooth
®
settings will be set to
factory default or not, depending on the
answer selected.
Changing the passkey
During pairing a mobile phone with the
Driver Information System, you must enter
the passkey (please see section "Pairing a
mobile phone" on page 153 for details). The
default value of the passkey is 1234. You
can change the passkey, see the following
description.
 Call up the Settings menu, see the
section "Calling up the Settings menu"
on page 167.
 Change Passkey menu item
 Settings menu
 In the Settings menu, select the menu
item
Change Passkey.
The input menu appears.