Equus VI DIS - Scan Function

141
AUX mode
USB playback
 To switch the function on/off: In the
Options menu, select the menu item
Random Folder.
Depending on the previous status, the
function will be switched on or off. The
status display
 changes accordingly.
 Display
 = function switched on
 Display
 = function switched off
When the function is switched on, the
icon additionally appears on the
right in the top status line.
The function switches off automatically
when you:
 select any track,
 switch to a different audio or video
signal source, for example to FM,
 switch the system off and back on
again.
Scan function
This function plays about 10 seconds of
each track on the USB memory stick and
then skips to the next track.
 Highlight the track from which you want
the function to start.
 Highlighted track
 To open the Options menu: Push

the controller .
 Status display
 Options menu
 To switch the function on/off: In the
Options menu, select the menu item
Scan.
Depending on the previous status, the
function will be switched on or off. The
status display
 changes accordingly.
 Display
 = function switched on
 Display
 = function switched off
When the function is switched on, the
icon additionally appears on the
right in the top status line.