238
Navigation
Functions during route guidance
The following functions are now
available in the Options menu:
Going back to map screen and
resuming route guidance:
Select the menu item
Goto Map
Screen
.
Changing the route:
Select the menu item
Change
Route
.
The Waypoint menu appears.
Please see the section “Change
route” on page 239 for the rest of
the description of this function.
Displaying the “Turn by Turn” list:
Please see the following
description.
Displaying the “Turn by Turn” list
In the Options menu, select the menu
item
Turn by Turn.
The “Turn by Turn” list containing the
following information about the route
appears.
Current vehicle position and the
destination (Icon ), including the
journey time to the destination.
If waypoints have been entered, the
waypoints (Yellow icons ),
including the journey times to the
destinations.
Roads to be traveling, including the
length of the route to be travelled.
The route section list is not refreshed while
it is on-screen.
Scrolling through the list
To scroll line by line: Turn
the
controller .
To scroll page by page: Push
the controller .
Closing the list
Briefly press the button.
Reroute/detour
You can use the reroute function to switch
route guidance to one of the four possible
alternative routes. The alternative routes
must have been calculated in advance,
see the section “Other routes” on page 233.
You can use the detour function to block a
specific stretch of the route section still to be
travelled for the route guidance. The system
then calculates a detour route if possible.
Calling up the Route menu
To call up the map display in
position mode: Briefly press the
button.
The map display appears.
To open the Options menu: Press the
controller
.
The Options menu appears.
In the Options menu, select the menu
item
Reroute/Detour.
The Route menu appears, the current
active route is marked with the icon
.
Now you can select another route or
block a route section.
To Next Page
Loading...