207
Navigation
Basic functions
To move the map: Push and hold the
controller
in any direction
().
The map moves accordingly.
To set the map scale: Turn
the
controller until the desired scale is
reached.
To quickly set the map to the vehicle
position: Press the button.
The crosshairs disappear. The map is
automatically set to the current vehicle
position and is in position mode.
Guidance volume settings
Setting the volume of the audible driving
recommendations
The volume can also be set during an
audible driving recommendation, see the
section “Functional introduction”, section
“Setting the volume” on page 33.
Opening the Settings menu
To open the Navigation main menu:
Press the button.
In the Navigation main menu, select the
menu item
Settings.
The Settings menu appears.
Setting the volume
In the Settings menu, select the menu
item
Guidance Volume.
A selection menu appears.
In the selection menu, select the menu
item
Adjust Volume.
The volume scale appears.
Turn
the controller until the
desired setting is reached.
The system saves this setting
automatically.
To close the menu: Press the
button.
Activating/deactivating audible driving
recommendations
If audible driving recommendations are
deactivated, you will see the icon on the
left-hand side of the map display.
The icon will also be visible in the bottom
status line, if the status line is displayed.
Option 1
To call up the map display in
position mode: Press the button.
The map display appears.
To open the Options menu: Press the
controller
.
The Options menu appears.
To activate/deactivate: In the Options
menu, select the menu item
Voice
Guidance Off
or Voice Guidance
On
.
The text of the menu item and the icon
to the left of the menu item change
accordingly, both always show the
current status.
Icon = Voice guidance switched
on
Icon = Voice guidance switched
off
To close the Options menu: Press
the button.
To Next Page
Loading...