258
Navigation
Settings
For information on general system
operation, please refer to the chapter
“Functional introduction” from page 17.
Opening the Settings menu
Press the button.
The Navigation main menu appears.
In the Navigation main menu, select the
menu item
Settings.
The Settings menu appears.
To close the menus: Press the
button repeatedly until all of the menus
are closed.
You can access the following functions in
the Settings menu:
Guidance Volume settings, see the
section “Guidance volume settings” on
page 207.
Map display settings, see page 258
Ferry preference settings,
see page 260
Avoid Area settings, see page 260
Displaying navigation information,
see page 264
Reset function, see page 264
Map display settings
Opening the Map Display settings menu
Open the Settings menu, see the
section “Opening the Settings menu”
on page 258.
In the Settings menu, select the menu
item
Map Display.
The Map display settings menu
appears in which you can activate,
deactivate and switch various functions.
The functions are listed below.
To close the menu: Briefly press
the button.
Function Display Mode
You can use this function to switch the map
display to day, night or automatic mode.
Open the Map Display settings menu,
see “Opening the Map Display settings
menu” on page 258.
In the Map Display settings menu,
highlight the menu item
Display Mode.
Push
the controller .
The Options menu appears. The
icon
to the left of a menu item
indicates the currently active setting.
Select the desired setting.
If you select the setting Auto, the map
display mode will be automatically switched
as a function of the vehicle illumination.
To Next Page
Loading...