265
Navigation
Settings
North up view/Heading up view
You can use this function to set whether the
map is oriented to the north or the direction
of travel.
To call up the map display: Briefly
press the button.
The map display appears.
To open the Map Options menu:
Press the controller
.
The Map Options menu appears.
In the Map Options menu, select the
menu item
North Up View or Heading
Up View
.
The map orientation is switched and the
text of the menu item and the icon to the
left of the menu item change
accordingly, both always show the
current status.
Icon =fixed map orientation,
north is always at the top.
Icon = dynamic map orientation,
driving direction is always at the top.
Map mode
The following functions are available:
Show Turn by Turn
Show Freeway Mode
Function Show Turn by Turn
If you activate this function, the system
can show you a turn list on the right-hand
side of the display, see the section “Turn
List” on page 243.
Function Show Freeway Mode
If you activate this function, the system
can show you freeway information on the
right-hand side of the display, see the
section “Freeway mode” on page 243.
Activating/deactivating a function
To call up the map display: Briefly
press the button.
The map display appears.
To open the Map Options menu:
Press the controller
.
The Map Options menu appears.
In the Map Options menu, select the
menu item
Map Mode.
To activate/deactivate a function:
Select the menu item
Show Turn by
Turn
or Show Freeway Mode.
Depending on the previous status, the
corresponding function will be activated
or deactivated. The status display to the
left of the menu item changes
accordingly.
Display
= function activated
Display
= function deactivated
To Next Page
Loading...