277
Voice control
DISC and AUX mode
Next/previous folder
You can use the command “Next folder” or
“Previous folder” to skip to the start of the
next or previous folder and automatically
start playback.
Press the button on the steering
wheel and say the desired command
after the signal tone.
The system starts playback of the
corresponding folder.
Skipping tracks forwards/
backwards
You can use the command “Next track” or
“Previous track” to skip to the start of the
next or previous track and automatically
start playback.
Press the button on the steering
wheel and say the desired command
after the signal tone.
The system starts playback of the
corresponding track.
Selecting a track directly
You can use the command “Track ...(1-99)”
to skip directly to a specific track.
Playback of the track starts automatically.
See also “Selecting a track” on page 278 in
the section “Operating examples”.
Random Song/Album function
You can use the comand “Random song” to
activate the following functions:
Random play of all tracks (audio disc or
USB playback only)
Shuffle song function (iPod
®
playback
only)
In the case of audio DVDs, random play is
restricted to the tracks in the currently active
group.
You can use the command “Random
album” to activate random play of all tracks
in the currently active folder (MP3 and wma
disc playback only).
Random play ignores tracks in subfolders
within the currently active folder.
To activate the RandomSong/Album
function: Press the button on the
steering wheel and say the command
“Random song” or “Random album”
after the signal tone.
The corresponding function will be
activated.
To deactivate the Random Song/
Album function: Press the button
on the steering wheel and say the
command “Random stop”.
The Random Song/Album function will
be deactivated.
Operating examples
Selecting a disc
Press the button on the steering
wheel.
# Ping %
! “Disc 3.”
# “Disc 3.”
The specified disc is played.
To Next Page
Loading...