231
Navigation
Functions after entering the destination
The menu item Add Waypoint is not
available if route guidance is not yet active
or if two waypoints already exist.
The system adds the previously
entered destination as a waypoint.
A new waypoint is always added as the
second last destination; the last destination
is always the main destination. An existing
waypoint is moved accordingly when a new
waypoint is added.
If the vehicle is moving, the system
calculates a new route, see the section
“Route calculation” on page 232.
If the vehicle is not moving, the
destination list appears. You can now
change the position of the waypoint in
the destination list.
To change the position of the
waypoint: Turn
the controller
until the desired position is reached.
To confirm the position: Press the
controller
.
The system calculates a new route,
see the section “Route calculation”
on page 232.
Add to Address Book
In the Options menu, select the menu
item
Add to Address Book.
The menu item Add to Address Book
cannot be selected if there are already
200 destinations saved in the category
Address List of the address book.
The crosshairs center will be saved as
destination in the category
Address
List
of the address book. When saving,
the system sets the standard icon
(red colored pin) in the map at the
destination position; this icon remains
visible in the map even after the save
operation.
The system automatically uses the
address as the destination name when
saving. You can edit the name and
assign a different icon later, see the
section “Editing an entry” on page 254.
Dial number
This function initiates a call to a POI. It is
only available if the following conditions are
met:
The entered destination is a POI.
The digital map contains the phone
number of the POI.
There is a mobile phone connected with
the system.
POIs (points of interest) include gas
stations, restaurants and banks, for
example.
In the Options menu, select the menu
item Dial Number.
The system initiates the call.
Adjust position
This function adjusts the destination
position. It is not available if the destination
was entered via the map.
In the Options menu, select the menu
item
Adjust Position.
The Options menu is closed.
To Next Page
Loading...