235
Navigation
Route guidance
For information on general system
operation, please refer to the chapter
“Functional introduction” from page 17.
Safety instructions
General information
Route guidance starts after the route has
been calculated and the appropriate menu
item has been selected.
During route guidance, the system guides
you to the destination by means of audible
driving recommendations and route
guidance displays.
If you leave the recommended route, the
system automatically calculates a new
route to your destination.
Audible driving recommendations
In the section “Guidance volume settings”
from page 207, you will find information on
the following:
Setting the volume of the audible
driving recommendations
Activating/deactivating audible driving
recommendations
Calling up a current audible driving
recommendation
Route guidance displays
The route guidance displays are only
visible if the display is switched to map
display and if the map display is in position
mode and not scroll mode.
For information on position mode, refer to
the section “Position/scroll mode within the
map display” on page 204.
To switch the display to map display
or the map display to position mode:
Press the button.
The display switches and the system
simultaneously outputs a current
audible driving recommendation.
Sample displays
A number of sample displays are shown on
the next page.
WARNING
During route guidance, the following factors
may increase the accident hazard:
Distraction from the traffic situation.
Failure to observe traffic signs, traffic
regulations and road safety facilities.
Inappropriate audible driving
recommendations or route guidance
displays as a result of the reality not
matching the data on the digital map,
for example due to road works or
modified road routing.
Always observe traffic signs, traffic
regulations and road safety facilities. They
always have priority over the audible driving
recommendations or route guidance
displays by the system.
To Next Page
Loading...