191
PHONE
Phonebook
The input menu has two user-control areas:
The area with the speller
and the area
with the menu items and .
To move from one area to another:
Push
the controller .
Entering a name
You can enter a maximum of 50 characters
for a name.
To enter a character: In the speller,
highlight a character by turning the
controller and press the
controller
.
The character is entered and appears in
the input field
.
To switch character set: In the speller,
select one of the menu items
.
The corresponding character set
appears in the speller.
To delete the last character in the
input field: In the speller, select the
menu item
.
The last character entered is deleted.
To delete all characters in the input
field: From the speller, push
the
controller and select the menu item
Delete All.
The complete entry is deleted.
To make a new entry: Push
the
controller
to move back to the
speller and enter characters as
described previously.
To confirm an entry: From the speller,
push
the controller and select the
menu item OK.
If the phonebook already contains an
entry with the name entered, you will
see an appropriate message.
To close the display: Press the
controller
.
To correct an entry: Proceed as
described above.
If the phonebook do not yet contain an
entry with the name entered, you will
see the data field menu.
Data field menu
Name data field
Data already entered
Home phone number data field
Work phone number data field
Mobile phone number data field
Default phone number
If you initiate a call to a phonebook entry
which contains more than one phone
number, the system uses the default phone
number for this. Please see the section
“Setting the default phone number”
on page 193 to find out how to set the
default phone number.
To Next Page
Loading...