256
Navigation
Editing Address Book entries
Switching the name display on/off
The system displays Address Book entries
in the map using appropriate icons. In
addition to the icons, the system can also
display the destination names. You can
activated/deactivate this display, except for
the categories
Home and Work.
To open the Options menu: Highlight
the name data field in the editing menu
and push
the controller .
The Options menu appears.
In the Options menu, select the menu
item
Name on Map.
The name display will be activated or
deactivated, depending on the previous
status. The status display to the left of
the menu item will change accordingly.
Display
= function activated
Display
= function deactivated
Assigning a different icon
The system displays Address Book entries
in the map using appropriate icons.
You can use this function to assign an
Address Book entry an icon other than the
standard icon.
You cannot assign a different icon for the
entry in the categories
Home, Work,
Favorite Point 1, Favorite Point 2,
Favorite Point 3 and Favorite Point 4.
To open the Icon menu: Select the
icon data field in the editing menu.
The Icon menu appears.
To select an icon: In the Icon menu,
highlight the desired icon and press the
controller
.
To confirm the selection and assign
the icon: Select the menu item
OK.
To reassign the standard icon: In the
Icon menu, select the menu item
Delete.
Changing the destination position
Select the position data field in the
editing menu.
The map display appears.
To set the map scale: Turn
the
controller until the desired scale is
reached.
To move the map: Push and hold the
controller
in any direction (,
or ).
The map moves accordingly.
To confirm the change: Press the
controller
.
The editing menu appears again.
To cancel the change: Press the
button.
To display address data in full:
Highlight the position data field in the
editing menu and push
the
controller
.
The Options menu appears.
To Next Page
Loading...