Gemalto Cinterion EHS6 User Manual

Cinterion
®
EHS6 AT Command Set 
2.12 AT^SCFG
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 58 of 513
Write Command
Configure Status LED line shared with GPIO5 line
AT^SCFG="GPIO/mode/SYNC"[, <g_mode>]
Response(s)
^SCFG: "GPIO/mode/SYNC", <g_mode>
OK
ERROR
+CME ERROR: <err>
Write Command
Automatic GPRS attach
AT^SCFG="GPRS/AutoAttach"[, <gaa>]
Response(s)
^SCFG: "GPRS/AutoAttach", <gaa>
OK
ERROR
+CME ERROR: <err>
Write Command
Enable/disable non volatile storage of AT+CFUN.
AT^SCFG="MEopMode/CFUN"[, <cfun>]
Response(s)
^SCFG: "MEopMode/CFUN", <cfun>, <cfun_save>
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SCFG="MEopMode/Dormancy"[, <dormancy>]
Response(s)
^SCFG: "MEopMode/Dormancy", <dormancy>, <eCallUSIM>
OK
ERROR
+CME ERROR: <err>
Write Command
Query/Configure steering of roaming
AT^SCFG="MEopMode/SoR"[, <SoR mode>]
Response(s)
^SCFG: "MEopMode/SoR", <SoR mode>
OK
ERROR
+CME ERROR: <err>
Write Command
Configure manufacturer name.
AT^SCFG="Ident/Manufacturer"[, <manufacturer>]
Response(s)
^SCFG: "Ident/Manufacturer", <manufacturer>
OK
ERROR
+CME ERROR: <err>

Gemalto Cinterion EHS6 Specifications

General

Brand	Gemalto
Model	Cinterion EHS6
Category	Control Unit
Language	English