Gemalto Cinterion EHS6 - Page 59

Cinterion
®
EHS6 AT Command Set 
2.12 AT^SCFG
 EHS6_ATC_V03.001 15/12/3
Confidential / Released
Page 59 of 513
Write Command
Configure product name.
AT^SCFG="Ident/Product"[, <product>]
Response(s)
^SCFG: "Ident/Product", <product>
OK
ERROR
+CME ERROR: <err>
Write Command
Enable/disable fast switch off.
AT^SCFG="MEShutdown/Fso"[, <fso>]
Response(s)
^SCFG: "MEShutdown/Fso", <fso>
OK
ERROR
+CME ERROR: <err>
Write Command
Query / configure undervoltage threshold
AT^SCFG="MEShutdown/sVsup/threshold"[, <vthresh>][, <PowerSupplyDomain>]
Response(s)
^SCFG: "MEShutdown/sVsup/threshold", <vthresh_BB_curr>, <vthresh_BB_request>
OK
ERROR
+CME ERROR: <err>
Write Command
Radio band selection
AT^SCFG="Radio/Band"[, <rba>]
Response(s)
^SCFG: "Radio/Band", <rba>
OK
ERROR
+CME ERROR: <err>
Write Command
Instant Power Limitation for SAR Reduction and Thermal Mitigation
AT^SCFG="Radio/Mtpl"[, <PL_mode>[, <PL_profile>, <rba>, <PL_limit>[, <PL_limit8psk>]]]
Response(s)
^SCFG: "Radio/Mtpl", <PL_mode>[, <PL_profile>, <rba>, <PL_limit>[, <PL_limit8psk>]]
In case of: <PL_mode>=0
^SCFG: "Radio/Mtpl", <PL_mode>
In case of: <PL_mode>=1 and <PL_profile>
^SCFG: "Radio/Mtpl", <PL_mode>, <PL_profile>
In case of: <PL_mode>=2 and <PL_profile> one profile configuration is printed out
^SCFG: "Radio/Mtpl", <PL_mode>, <PL_profile>, <rba>, <PL_limit>[, <PL_limit8psk>]
^SCFG: ["Radio/Mtpl", <PL_mode>, <PL_profile>, <rba>, <PL_limit>[, <PL_limit8psk>]]
^SCFG: ["Radio/Mtpl",...]
In case of: <PL_mode>=2 full profile configuration (1-8) is printed out