HP LaserJet Enterprise M552 - Page 129

3. Use the arrow buttons on the touchscreen to scroll down and highlight the +3:Administrator item, and
then touch the OK button to select it.
Figure 2-7 Select the +3:Administrator item
4. Use the arrow buttons on the touchscreen to scroll down and highlight the +A:Remote Admin item, and
then touch the OK button to select it.
Figure 2-8 Select the +A:Remote Admin item
5. Use the arrow buttons on the touchscreen to scroll down and highlight the 1:Start Telnet item, and then
touch the OK button to select it.
Figure 2-9 Select the 1:Start Telnet item
6. Do one of the following
●
If a connecting message displays briey, go to step 7.
Figure 2-10 Telnet connecting message
●
If an error message displays, use the steps below to identify the problem.
ENWW Solve problems checklist 101