HP LaserJet Enterprise M552 - Page 222

Table 2-33 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Print Quality
(continued)
Tray 1 Normal*
Alternate
Aects how often the
printer performs an
internal cleaning
procedure. Use the
Alternate setting if the
printer is having
problems with extra
toner on pages. In this
mode, the printer
performs the cleaning
procedure after each
job that is printed
from Tray 1. Using this
mode increases wear
on all the toner
cartridges.
Background Normal*
Alternate 1
Alternate 2
Alternate 3
Use if pages are
printing with a shaded
background. Using this
feature might reduce
gloss levels. Use the
Alternate 1 setting if
the page shows a
shaded background on
the entire page. Use
the Alternate 2 setting
if the page is showing
thin vertical lines on
the background. The
Alternate 3 setting
applies the Alternate 1
setting and the
Alternate 2 setting at
the same time. Use
this setting if the rst
two settings do not
correct the problem.
194 Chapter 2 Solve problems ENWW