HP LaserJet Enterprise M552 - Page 223

Table 2-33 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Print Quality
(continued)
Uniformity control Normal*
Alternate 1
Alternate 2 (M552/M553)
Alternate 3 (M552/M553)
This setting might
help correct
uniformity in print
quality issues, such as
a mottled appearance
due to poor transfer of
toner onto the page.
The Alternate 1 setting
increases the T1
transfer bias and can
be used for any media
type. The Alternate 2
setting decreases the
fuser temperature and
reduces the
throughput. Use this
setting if the printer is
experiencing mottled
output due to poor
fusing on normal or
light paper types. The
Alternate 3 setting
applies the Alternate 1
setting and the
Alternate 2 setting at
the same time. Use
this setting if the rst
two settings do not
correct the problem.
Tracking control On*
O
Normally, this setting
should be set to On.
Tracking control
algorithm is turned
ON/OFF. It is not
expected that the
customer will ever
need to change this
setting.
Registration Normal*
Alternate
Use this setting if the
printer is having
trouble with color-
planes shifting or
overlapping on the
page. Use the
Alternate setting if the
page has color mis-
registration problems.
ENWW Tools for troubleshooting 195