Rigging work
11.1 Rigging work checklists for crane operation with the main boom
Operating Instructions GMK5250L 3 302 633 en 11 - 3
27.09.2017
10. Fold out all ladders and extend all stair treads;
à Ladders, p. 4 - 5,
à Step at the crane cab, p. 11 - 141.
11. Inspect the truck crane, while looking out in particular for any leaking
fluids (oil, fuel or water).
12. Start the engine for crane operation;
à p. 9 - 5.
13. If necessary, switch off the houselock and unlock the superstructure;
à Switching off the houselock, p. 10 - 19,
à Unlocking the superstructure, p. 10 - 16
14. Pick up the hook block and reeve the hoist rope again, if necessary;
à Hook block on a separate vehicle, p. 11 - 99,
à Hook block on the bumper, p. 11 - 95,
à Reeving and unreeving the hoist rope, p. 11 - 104.
s
To Next Page
Loading...
Need help?
General
