8A O2 and H2O analysers
Returning analysers to MBRAUN
Page
8A - 14
MB-20-G/MB-200G-W_MB-LABmaster_MB-200 MOD_TP700
Operating Manual - V5.0 - 04/2018 - STD
Once you have received the RMA number:
► Return the analyser to MBRAUN Service.
8A.7.3 Returning an analyser for calibration
MBRAUN analysers are calibrated at the factory before dispatch. MBRAUN recommends
having the analysers regularly calibrated in the MBRAUN analyser laboratory.
The calibration cycle depends on the gases in circulation (purity, trace gases, etc.).
Based on long term experience with analyser applications, MBRAUN recommends a
yearly calibration cycle.
To Next Page
Loading...
